Safety requirements for the operation and driving

  • Detail

Safety requirements for forklift operation and driving

1 When driving, the bottom end of the fork should be away from the ground, and the function display height should be maintained at 300 ~ 400mm under high speed (2000r/min) and high temperature, and the gantry must be tilted back

2. Do not raise the fork too high when driving. When entering or leaving the operation site or driving, pay attention to whether there are obstacles in the air. When the load is driving, the fork must not be raised too high, which will affect the stability of the forklift

3. After unloading, the forks should be lowered to the normal driving position before driving

4. When turning, if there are pedestrians or vehicles nearby, you should send a driving signal first. It is forbidden to turn sharply at high speed, which will cause the vehicle to lose lateral stability and overturn

5. It is strictly forbidden to stop the forklift when it is driving downhill, and it is forbidden to brake suddenly when it is driving with load except under special circumstances

6. When the forklift is running, it must abide by the traffic rules in the factory and keep a certain safe distance from the vehicle in front

7. When the forklift is running, the load must be at the lowest position where it is inconvenient to travel due to the low risk of establishing a recycled plastic particle factory, and the gantry should be tilted back appropriately. Do not raise the load except when stacking or loading

8. The height of the load shall not block the driver's line of sight. Under special circumstances, when objects affect the line of sight of the front, drive at a low speed when reversing

9 It is forbidden to turn on the ramp or drive across the ramp

10. The safe driving speed of forklift truck in the factory area is 5 km/h, and it must be driven safely at a low speed when entering the production workshop area

11. When lifting, lifting or driving the forklift, it is forbidden for personnel to stand on the forklift to hold objects and play a balancing role

12. If problems are found, they should be repaired and reported in time, and never work with diseases or hide them

accelerate the development of aluminum based new material industry

Copyright © 2011 JIN SHI